Case
Jump to navigation
Jump to search
 |
This page needs to be cleaned up, because its either hard to read or contains very little information. You can help Free60 by editing this page and cleaning it up. |
The Xbox 360 Case is made of plastic and was originally made to be hard to open. However it can easy be removed :
- Remove the HDD
- Remove the Face Plate by inserting your Right thumbs into it and forcing it a bit upwards
You need to remove this panel before lifting the front panel•Then remove both side pannels by inserting a small iron tool into the holes, and popping out the place holders
- Slowly lift up the Front panel, by unlocking the 4 plastic placesholders about 4cm
- Then insert a small tool in each hole of the backplate and onpup the back side
You now can lift up the upper part of the casing
To remove the border case, Remove 6 large screws from the down panel with a torx T10 screw driver.
Downside of the metal casing
Motherboard